|
|
Post by Rube on Jul 25, 2012 5:02:37 GMT -5
Got a 7.4V 2S 10000mAh Charged it once, everything was great.
I charge again and the first cell only hits 3.8V and the 2nd hits 4.2 (like it should) then the charger thinks the battery is fully charged.
WHAT DO?
|
|
|
|
Post by Mr. Tuxedo on Jul 25, 2012 5:04:53 GMT -5
Just a bad cell I guess. What was your low-voltage cutoff set to?
|
|
|
|
Post by Rube on Jul 25, 2012 5:05:01 GMT -5
Its built into the car. Not sure but I would assume 3.0-3.1V per cell (so 6V)
|
|
|
|
Post by Mr. White on Jul 25, 2012 5:05:25 GMT -5
It's not uncommon for HW lipos to have a bad cell.
|
|
|
|
Post by Cybrus on Jul 25, 2012 5:05:40 GMT -5
low voltage cutoff for lithium polymer batteries should be 3.2 volts. maximum is 4.2 volts. you done ****ed up.
|
|
|
|
Post by Rube on Jul 25, 2012 5:05:50 GMT -5
So what now?
|
|
|
|
Post by Rube on Jul 25, 2012 5:06:07 GMT -5
OK probably 3.2-3.4 then. Its the defualt thats setup from the factory for Lipo batteries. I dont think there is a way to change it on my ESC
|
|
|
|
Post by Mr. Tuxedo on Jul 25, 2012 5:06:22 GMT -5
Can you get another one?
|
|
|
|
Post by Rube on Jul 25, 2012 5:06:40 GMT -5
Yeah, just lazy
|
|
|
|
Post by Non-Conquering Wolf on Jul 25, 2012 5:07:07 GMT -5
Sounds like a bad cell.
|
|
|
|
Post by Rube on Jul 25, 2012 5:07:14 GMT -5
I guess I cant do anything
|
|
|
|
Post by Ja(v)ie on Jul 25, 2012 17:49:54 GMT -5
return it
|
|
